Resources and Services
Consumer Guides
Prevent Mildew
Mildew is a thin, black, or sometimes white, growth produced by mold. Molds are plants belonging to the group known as fungi. Though molds are always present in the air, those that cause mildew need moisture and certain temperatures to grow.
Mold will grow on anything and mildew will flourish wherever it is damp, warm, poorly lighted and/or where air is not circulated. Cellars, basements, crawl spaces and even clothing closets should be watched closely for growth. Mildew can also be found on draperies and rugs in basement recreation rooms, on shower curtains and on damp clothes rolled up for ironing. These molds are also likely to grow in a new house because of moisture in the building materials.
As the molds grow, they cause considerable damage. They leave a musty odor; they discolor fabrics, including leather; and sometimes they eat into them until the fabrics rot and fall to pieces.
Things that can cause mildew:
* Environments that contain warm temperatures and high humidity levels are ideal for mildew growth.
* Soil on dirty articles, including clothing, can supply enough food for mildew to start growing when moisture and temperature are right.
* Greasy films, such as those that form on kitchen walls, also contain many nutrients for mildew-causing molds.
Preventing Mildew
* Keep places in your home, where mildew is likely to grow, as clean as possible.
* Excessive moisture may indicate that repairs or additional insulation are needed. Replace cracked or defective mortar. Some basements are continually wet from water leaking through crevices in the wall. Make sure outside drainage is adequate.
* Take proper waterproofing measures.
* If your clothes dryer is equipped with a vent, have it exhausted to the outside to remove moist air.
* Heat. Get rid of dampness by heating the house for a short time. Then open doors and windows to let out the moisture-laden air. An exhaust fan may be used to force it out.
* Cool air holds less moisture than warm air. Properly installed air-conditioning systems remove moisture from the air by taking up warm air, cooling it and circulating the cool, dry air back into the room. A humidistat can be attached to the unit to control the humidity. When using air-conditioners or dehumidifiers, keep windows and doors closed.
* Air movement and good ventilation are excellent at removing moisture. When the air outside is drier than that inside, ventilation allows the dry air to enter, take up excess moisture and then be carried outside. When natural breezes are not sufficient, you can use electric fans placed in a window, set in a wall or vented to the attic to move air from the house.
* Never let clothing or other fabric articles lie around damp or wet. Dry soiled clothes before putting them into the hamper. Stretch out wet shower curtains. Dry washed garments and fabrics thoroughly and quickly. Fabrics dried slowly may get sour and musty smelling-a sign of mold growth.
Odor
Tip: Musty odors, which indicate mold growth, are sometimes noticeable in basements and shower stalls. Take special precautions to get rid of musty odors as soon as possible to prevent further objectionable and damaging mold growth. Usually musty odors disappear if the area is well heated and dried. If the odors remain a service professional is your best bet.
More Popular Entries
Additions & Remodels
Remodeling Opportunities in the Kitchen
Details Make Home Offices Work
Reinvent Your Home
Agents (Real Estate), Appraisers & Home Inspectors
Condominiums
Glossary of Real Estate Terms
House Buying Mistakes
Appliances
Repair Dishwasher and Water Damage
Remove Rust From Water
Tip: Cleaning Dishwasher Stains
Builders (New Homes), Architects & Designers
More Return on Your Home Improvement Investment
Checklist: Recommended Questions to Ask a Contractor
Checklist: Questions to Ask Your Architect
Carpentry & Cabinets
Tip: Repair Laminate Countertops
Steel vs. Wood Framing
Reface Cabinet
Cleaning Services
Breathing Better in Your Home
Tip: Cleaning Fireplace Burns
Choosing a Maid Service
Concrete, Brick & Stone
Specialty Finishes for Concrete Patios and Other Flatwork
Installing Masonry Flatwork
Pouring Concrete Driveway or Walkway
Consumer Guides
Remodeling Increases Value
Planning Small Plumbing Installation
Window Replacement
Design Ideas
Remodeling Opportunities in the Kitchen
Choosing Between Blinds or Shades
Patios for Living
Electrical, Telephone & Data
While You’re Away
Generator Repair
Illuminate Your Kitchen
Expert Advice
Window and Door Solutions
Refinishing Hardwood Flooring
Moisture Build-up on Windows
Flooring
Carpet Types
Damaged Tiles
Ceramic Tile
Handyman Services
The Benefits of Weatherstripping
Find a Handyman for Small Repairs
What Happened to the Handyman?
Heating & Cooling
Understanding Boiler Radiator Systems
Installing Central Heating
Checklist: Cold Weather Survival Tips
Home Construction
Do-It-Yourself Compared to Hiring a Pro
Timber Framed Homes
Understanding Pre-manufactured and Kit Homes
Landscape, Decks & Fences
Landscape Design
Using a Tree Stump Removal Service
Find a Garden Hose
Moving & Storage
Stowing it Away: Where to Put It
Finding a Truck Rental Service
Checklist: Hiring a Real Estate Agent
Other Services
Assessing Storm Damage
Tents for a Special Occasions
Checklist: Protect Your House from Fire
Painting & Staining
Exterior Painting
Quality Paint Jobs
Planning for House Painting
Plumbing
Install a Water Heater
Install a Solar Water Heater
How to Hire a Plumber
Quick Tips
Tip: Repair a Septic System
Checklist: Childproofing Your Home and Yard
Tip: Repair Concrete Steps
Roofing, Siding & Gutters
Ventilation is Key to How Long Your Roof Will Last
Tip: Roof Leaks
How to Buy Roofing
SP Feature Article
The Internet Will Change the Buying of Services
Walls & Ceilings
Understanding Plaster
Drywall Panels and Sheets
Drywall Installation Techniques
Windows & Doors
Window and Door Solutions
The U-factor of Thermal Replacement Windows
Security Bar Install