Realty.com » Resources and Services

Login • Register

Resources and Services

Consumer Guides

Furnace Tune-up

Who wants to think about the heating system when it’s warm and sunny outside? But winter is never that far away, and having a heating system service done now will ensure that the heat will come on when it is finally needed.

Q: When I called a heating and air contractor to fix my 17-year-old furnace, he told me it was beyond repair and quoted me a “special” price to have it replaced, if I signed his contract that day. I don’t like being pressured into making a decision, especially one that involves thousands of dollars.

A: Unfortunately, we are hearing more and more stories of high pressure and even scare sales tactics these days, which is totally unnecessary when someone is offering a valuable product or service at a fair price. Of course, you should always get competitive estimates on costly home improvements. Contact another heating and air company, describe the problem, tell them the make, model, size and efficiency ratings of the new unit the repair person is trying to sell you, and see what they say. In this case, you probably would save money by replacing a unit that is over 15 years old, but you certainly need more information and options to make a wise decision with which you can feel comfortable.

Q: Last year when we turned on the furnace for the first time one morning, it

smelled so bad we were worried it was carbon monoxide or something else was wrong. Is this normal?

A: The odor is normal because dust collects on the heat exchanger over the summer, and turning it on for the first time simply burns the dust off. Carbon monoxide is odorless, so you could not smell it. Homeowners should install a good carbon monoxide detector to make sure none of this deadly poison is present in their homes.

When you turn on your furnace for the first time leave the windows open to dispel the odor quickly. This is also the ideal time to schedule a maintenance appointment to make sure your furnace will work properly when you need it.

Q: What does a furnace maintenance check-up consist of?

A: We perform the following steps:


* Inspect thermostat for proper operation.
* Inspect filter and change or clean as needed.
* Check all electrical components and controls.
* Oil motors as needed.
* Inspect heat exchanger for possible cracks. A crack in the heat exchanger will introduce carbon monoxide into the living space.
* Check air flow. If diminished, it may be necessary to clean the evaporator coil.
* Check air fuel mixture, where appropriate.

Q: Is there anything a homeowner can do to assure proper operation and safety of their furnace?

A: Yes. The first thing to check before turning on your unit is to make sure nothing flammable has been stored next to the furnace over the summer (we frequently find lawn mowers, gas cans, etc. stacked against the furnace in the garage!) Use the following as a guide:


* Run your heater for a few minutes now, before you need it. If you wait until the first cold morning to discover is isn’t working, you’ll find yourself on a waiting list before a heating and air specialist can come to fix it.
* Change the filters regularly. Dirty filters restrict air flow, reducing efficiency and worse case, can cause the heat exchanger to overheat. Disposable fiberglass filters should be replaced. Electrostatic or electronic filters need to be washed regularly.
* Be sure all access panels are secure, with all the screws in place.
* Be sure the thermostat is set in the heating mode. Just setting the dial above room     temperature will not activate the heat if it is still set in the air conditioning mode.

 

Q: The home we just purchased has a heat pump and it doesn’t seem to warm up as quickly as our previous house which had a gas furnace.

A: A heat pump is simply an air conditioner with the ability to reverse the flow of refrigerant (freon), and gas furnaces are simply more efficient than air conditioners. If your thermostat is set at 70-degrees, your heat pump will discharge air at approximately 20-degrees above thermostat setting while a gas furnace produces approximately 40-degrees hotter air, naturally warming the area much faster.

More Popular Entries

Additions & Remodels

Stylish Basement Remodels
Checklist: Recommended Questions to Ask a Contractor
Home Improvement Trends

Agents (Real Estate), Appraisers & Home Inspectors

Townhouses
The Final Walk Through
Bringing it all Home—the Closing

Appliances

Garbage Disposals
Tip: Dishwasher
Tip: Instant Hot Water Dispenser Problems

Builders (New Homes), Architects & Designers

Small Feng Shui Tips
Checklist: Questions to Ask Your Architect
Tip: Water Seepage

Carpentry & Cabinets

Tip: Built-In Desks
Different Sized Cabinets
Cost and Quality of Kitchen Cabinets

Cleaning Services

Cleaning Asphalt Shingle Roof
Checklist: Get Your Home Ready for Spring
Musty Smell in Attic

Concrete, Brick & Stone

Tuck-pointing
Concrete Sawing
Retaining Walls

Consumer Guides

Townhouses
The Final Walk Through
Bringing it all Home—the Closing

Design Ideas

Herb Gardens
Illuminate Your Kitchen
Building a New Home

Electrical, Telephone & Data

Illuminate Your Kitchen
Checklist: Electrical Wiring Project
Upgrade for the Future

Expert Advice

Refinishing a Peeling Porch
Cleaning Asphalt Shingle Roof
Frozen Pipes

Flooring

Choosing the Best Carpet for Your Home
Steam Cleaning Grout
Cleaning Hardwood Floor Inlay

Handyman Services

Checklist: Biyearly Maintenance
Checklist: Fall Maintenance
Do-It-Yourself Compared to Hiring a Pro

Heating & Cooling

Tip: Ceiling Fan Solutions
Air Quality
Checklist: Cold Weather Survival Tips

Home Construction

Do Homework Before Building a New Home
Tip: Panelized Homes
Building a New Home

Landscape, Decks & Fences

Checklist: Spring Maintenance
Refinishing a Peeling Porch
Herb Gardens

Moving & Storage

Remodeling Increases Value
Preparing Your House for Sale
Checklist: Increase the Potential Sale Price of Your Home

Other Services

Radon Testing and Abatement
Disability Elevators
Tip: Mildew on Wood

Painting & Staining

Fun Painting Techniques
Interior/Exterior Painting
Peeling Paint

Plumbing

Frozen Pipes
Water Damage
Loss of Pressure

Quick Tips

Checklist: Spring Maintenance
Checklist: Biyearly Maintenance
Checklist: Fall Maintenance

Roofing, Siding & Gutters

Helpful Roofing Terms
Roof Treatments
Comparing Aluminum to Vinyl Siding

SP Feature Article

The Internet Will Change the Buying of Services

Walls & Ceilings

Paint Over Paneling
Nicotine Stains on Walls and Ceilings
Repair Small Hole

Windows & Doors

Tip: Door Problems Solved
Awnings
Checklist: Home Safety

copyright 2008 Realty.com